TM-D700A
	Australia Dollars Call Kenwood Dealer

Conspicuous with its extra large amber and black display, Kenwood's new TM-D700A is fully equipped to make the most of the exciting opportunties offered by SSTV, GPS, and APRS^® ( the Automatic Packet/Position Reporting System that is rapidly gaining popularity worldwide), and other innovative features. This mobile transceiver with built-in TNC offers a wide range of data communications options, including simple packet operation using AX.25 protocol. You can also send and receive SSTV images using Kenwood's VC-H1. Ham radio is truly entering a new era.

Features

• Full dual-band operation: VHF x VHF / VHF x UHF / UHF x UHF 
• Wide-band recieve: 118~524, 800~1300 MHz (excluding cellular blocked + frequencies) 
• Detached panel (extension cable and panel holder supplied) with extra large (188 x 54 dots) backlit LCD and multifunction key display (reversible) 
• Improved key operation announcement with option VS-3 voice synthesizer 
• Built-in 1200/9600bps TNC complaint with AX.25 protocol and KISS mode 
• Simplified packet monitoring 
• SSTV functions with Fast FM for transmission of images in just 14 secs (approx.) and dual receive for voice and image transmissions (two frequencies sumultaneously) 
• 200 memory channels with 8-character memory name input 
• Up to 10 programmable memory scan banks 
• Easy-to-use menu system similar to the TH-D7A 
• Built-in DCS (Digital Code Squelch) and CTCSS encode and decode 
• CTCSS tone frequency scan 
• DCS code scan 
• 9600bps PC based packet communications for chat or BBS 
• DX packet cluster monitoring 
• Cross-band repeater 
• Wireless remote controller 
• 1750Hz tone burst 
• D-sub 9 pin terminal (for PCs) 
• GPS input terminal (NMEA-0183) 
• Visual band scope 
• Mute function 
• Memory control program available via internet access 
• New backlit microphone with alphanumeric message input.

APRS^® (Automatic Packet/Position Reporting System)

• Position/Directional data, with an NMEA-0183 compatible GPS receiver you can transmit position data for automatic calculation of distance, current speed and heading. Last 4 digits can be masked for position ambiguity. Manual input of latitude and longitude is also possible. 
• Versatile messaging, transmission of position data can be accompanied by a choice of programmable status text (up to 28 characters), position comments (15 settings), icons and bulletins. For added messaging flexbility, individual alpha messages (up to 64 characters) can also be sent. 
• Station list, store recieved APRS^® data in up to 40 station reports. 
• Grid square locator, position data is displayed on the grid square locator for visible reference. 
• BCON Tx interval (0.2, 0.5, 1, 2, 3, 5, 10, 20, 30 min.) 
• Packet path selection for Digipeat 
• Weather station and PHG data reception 
• Digipeat station and DIGI function capability 
• Auto Message Reply 
• Audible APRS^® message receive (callsign) notification (requires VS-3) 
• Waypoint Position data output