|


















| |

Everyone wants the fastest, the biggest, the
most reliable compressors but at the right price. How’s 170 Litres per minute
for fast? Other popular compressors just do not stack up to the BIG BOSS
compressor. Make sure the alternator is up to the task because the bigger the
compressor the more amps it will need! BOSS 12volt compressors do not
require oil. The designs are quick and easy to mount. Engine driven compressors
available upon request, brackets are up to the installer.
Please note: A suitable circuit breaker must
be used for protecting your compressor, along with a check valve to prevent air
back flow. Do not oil these compressors. Do not exceed maximum pressure 200psi.
| Item Code # |
Description |
Applications |
Image |
| COM-PX02 |
12volt compressor 1/4 hp
1.5cfm free flow 50% duty cycle, recommended working pressure 0-150psi - max pressure 200psi 3/8npt
port head, built in air filter, Crankcase fed design,
max amp draw 25amps start up under load - oil free design,
quite running, rebuildable design, 3 mounting holes with rubber
grommets
MUST USE CHECK VALVE TO PREVENT BACK FLOW + 25AMP CIRCUIT BREAKER - NEVER
OIL THIS COMPRESSOR |
Great for filling 9 litre tank -
inflating airbag load assist kits or tyres etc.
|
 |
| COM-PX02
COMPLETE |
same compressor as above with
braided hose, check valve and 3/8" flare fitting
MUST USE CHECK VALVE TO PREVENT BACK FLOW + 25AMP CIRCUIT BREAKER - NEVER
OIL THIS COMPRESSOR |
Great for filling 9 litre tank -
inflating airbag load assist kits or tyres etc. |
 |
| COM-PX07BARE |
12volt compressor 3/4 hp
engine 100% duty cycle 170ltr free flow rate (approx
3.5cfm) recommended working pressure 0-150psi maximum pressure
200psi - 35amp maximum draw. Fan cooled engine and
cylinder head, oil free design,
3/8npt ported head, rebuildable design, crank case fed - external washable
air filter, cast aluminium legs, special piston valve design for maximum
performance - MUST USE CHECK VALVE TO PREVENT BACK FLOW+ 35AMP
CIRCUIT BREAKER - NEVER OIL THIS COMPRESSOR |
Suitable for industrial and
automotive use. Up to 30L tanks. Best used with an
air tank. (As used by RACQ roadside assistance) |
 |
| COM-PX07B/F/C |
Same compressor as above with
braided hose, check valve, and 3/8" flare fitting MUST USE CHECK VALVE TO
PREVENT BACK FLOW+ 35AMP CIRCUIT BREAKER -DO NOT OIL |
Suitable for industrial and
automotive use. Up to 30L tanks. Best used with an
air tank. (As used by RACQ roadside assistance) |
 |
| COM-PX07COMPLETE |
Same compressor as above with
wiring kit, pressure switch, solenoid, braided hose, check valve, and 3/8"
flare fitting MUST USE CHECK VALVE TO PREVENT BACK FLOW+ 35AMP CIRCUIT
BREAKER -DO NOT OIL |
Suitable for industrial and
automotive use. Up to 30L tanks. Best used with an
air tank. (As used by RACQ roadside assistance) |
 |
Key Benefits of
both units
- 12 volt
- Oil free design - never require oiling
- High performance, long life rebuildable
design
- 3/8" npt ported head
- Crank case fed
- Our compressors pump more air than
any other 12volt compressor on the market
* that we have tested
Back to top
or scroll down for more

| Item Code # |
Description |
Image |
| COM-ENGINE |
Engine driven compressor kit.
Converts any air conditioning pump to a air compressor capable up to 200psi.
Includes: special oil for converting 2 pumps/filter with adapter/high
temperature 900mm braided hose/check valve/pressure switch (110-150psi) t
piece/adapters. |
|
| COM-AIRFILTER |
Small air filter suits engine
driven compressor |
|
| COM-TH-01 |
500 mm 11mm Teflon
stainless braided hose, high
temperature design, fitted with swivel to suit flare fitting - JIC
3/8"FJ & 3/8"npt male fitting for compressor,
chrome plated hardware
other lengths available upon request |
|
| COM-MJBV-03-S |
Check valve 3/8" npt,
prevents back flow to compressor when not in use,
brass needle with steel seat, stainless
steel return spring |
|
| COM-3/8FL-3/8NPT |
3/8" flare x 3/8" npt brass
fitting swivel for easy braided hose fitting to
compressor |
|
| COM-CB-B162-CTN |
100 amp solenoid 100% Continuous
duty |
|
| COM-MAF401-10A |
Water filter aluminium case 3/8"
port for direct valves |
 |
| COM-PS-03 |
110~135psi pressure switch
|
 |
| COM-PS-04 |
150~180psi pressure switch |
 |
| COM-PS-05 |
110~150psi pressure switch |
 |
| COM-PS-08 |
70~100psi pressure switch |
 |
Back to top
or scroll down for more
We know the most abused part of an air ride
system is the air compressor. Our PX07 will out perform most other 12 volt air
compressors, however if over time it wears out, we sell all the rebuild parts
so its simple and easy to get it up and running FAST.
| Item Code # |
Description |
Image |
| COM-PX07HEAD |
PX07 compressor replaceable head
|
|
| COM-PX07BARREL |
PX07 compressor replaceable
barrel |
|
| COM-PX07PISTON |
PX07 compressor replaceable
piston |
|
| COM-PX07AIRFIL |
PX07 compressor replaceable air
filter |
|
| COM-PX07AIRFILA |
PX07 compressor replaceable air
filter adaptor |
|
| COM-PX07BALAN |
PX07 compressor replaceable
balance crank |
|
| COM-PX07CRANK |
PX07 compressor replaceable crank
case |
|
| COM-PX07ENGINE |
PX07 compressor replaceable engine
case with magnets |
|
| COM-PX07ARMAT |
PX07 compressor replaceable
armature |
|
| COM-PX07BRUSH |
PX07 compressor replaceable brush
box |
|
| COM-PX07BRUSHC |
PX07 compressor replaceable brush
box case |
|
| COM-PX07FAN |
PX07 compressor replaceable fan |
|
| COM-PX07FANC |
PX07 compressor replaceable fan
cover |
|
| COM-PX07FEET |
PX07 compressor replaceable feet |
|
Back to top
|