This sleek jet is still the fastest! Over 10Kg. weight and powered by 2 X 15 Kg. thrust jets.

Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the sr71.3dm file.

Super-scale WWII Super-Fighter, fully operational, fully animated control surfaces, retractable landing gear. Plus advanced texturing, etc. This model has the lot!

Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the mustang1.3dm file. Enjoy but don't ever raise the landing gear while still on the ground!

Island Scene features a detailed 3D Statue of Liberty - full sized. Island also has nice trees and landing strip. A tribute to New York's best known lady!

Install Notes: Unzip the files into the "default" directory under the "scenes" directory which is in PRE-Flight's install directory. Run PRE-Flight and go menu Scene, Load and select the new ".sce" file.

New Feature: Full compatibility with Microsoft .x 3D file format. AeroDesigner is a fully user-configurable aircraft designer. AeroDesigner (based on PRE-Flight) allows an unlimited number of flight physics components and has a 3D interactive interface for ease of use. The finished design can be test flown using PRE-Flight. This is the model-creating tool to create PRE-Flight models!

Install Notes: Unzip the files into the PRE-Flight install directory. Create a shortcut to the aerodes.exe file(optional). Don't forget to read the Help and Tutorial (tutorial file link below).

This German "secret weapon" was powered by a rocket engine and features movable control surfaces, elevon controls, flaps, and new sound.

Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the me163.3dm file. Enjoy but watch out for rocket engine burns!

These modifications address some issues in the physics of the models found in version 1.8 of PRE-Flight. Models affected : Pitts Biplanes, Ergo helis, Cessna trainer, and Sailplane. Body air friction has been added, and rotor friction in the helicopter rotor has been corrected. Other Quick Parameters have also been corrected.

Install Notes: Unzip the file into a temporary directory. Read the readme.txt file for installation instructions.

Install Notes: Unzip the file into a temporary directory. Run Setup.exe. Read the readme.txt file.

Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the ergo50.3dm file. QuickEdit parameters are similar to the Ergo 30 but the 50 is, of course, a larger and meaner machine!

Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the t33.3dm file. The model is hand-launched and will not take off from grass (like the real model) so go menu Scene, Quick Edit and increase the Main Model Location Y (altitude) to 2.0 and set Speed Z to about 5. Enjoy!

PRE-Flight Screensaver has been improved and now has no resource or memory leaks. This is a HUGE improvement over the previous version. The Screensaver will only run on Windows (95 and up). It requires the FULL PRE-Flight free version (1.5) - please download and install this before running the screensaver.